wireless serial port

hi
I need a circuit of some sort that can work as a wireless serial port for my robo.
it needn't be fast, only reliable over at least 10meters and have no SMD's or har to find components.

I live in south africa, where finding components are quite hard

thanx

edd

edrich said:

hi
I need a circuit of some sort that can work as a wireless serial port for my robo.
it needn't be fast, only reliable over at least 10meters and have no SMD's or har to find components.

I live in south africa, where finding components are quite hard

Click to expand...

You could do it via radio, or via IR - but 10m is pushing IR somewhat.

I would suggest you use licence free radio modules, they are available at quite reasonable cost. You can get them as basic radio modules, and use PIC's or similar for your own encoding/decoding system. Or you can can more expensive ones which have this already included in the modules.

The modules vary somewhat from country to country, so you probably need to source them in South Africa, or at least find out which types are allowed there.

but these modules are like hens teeth here in SA and it works out prettey epencive whan one wants t import.
we have a exchange rate of 1USD buys R6
so that is not a option.
prehaps someone can supply me with a link to a schematic for a rf device that uses the RFpic's?

thanx

edd

Hi,

have a look at the rFPICs' datasheets and application notes. (www.microchip.com) they tell You all You need, if You want to DIY.

hth
regards
joachim

RGBrainbow, good find!

I've been looking for these kind of devices for ages...just never really bothered to open a new post

Thanks