Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Register Log in
  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Which is Best: DM410 Dremel Drilling Station or Proxxon IB/E + MB 140/S?

Status
Not open for further replies.
@ Blueteeth: Yes, that's right, then he attached the other end of the elastic band to the main body of the drill press. - I suspect the ideal solution will involve somehow increasing the friction between the T-bar and the hole it's mounted in. Then you could slide the bar into a position where it isn't annoying and just leave it there while drilling.

@KeepItSimpleStupid: A pair of O-rings sounds like it should be effective.

Analogue.
 
Status
Not open for further replies.

Similar threads

sk001
  • Question
Which is easier to track the direction of the object?
Replies
13
Views
2K
camerart
camerart
C
  • Question
is this circuit control board damaged or not?
Replies
1
Views
1K
sagor1
S
A
  • Question
Which capacitor is this?
Replies
6
Views
1K
ZipZapOuch
ZipZapOuch
S
  • Question
which mosfet
Replies
10
Views
1K
Pommie
P
S
  • Question
Is this an encoder?
Replies
6
Views
808
stuhagen
S

Latest threads

New Articles From Microcontroller Tips

Back
Top