Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

What are the connections on this 18650 charger?

Status
Not open for further replies.

stuee

Member
Hi. I purchased a 1amp 1-8battery charger module and a 4 battery holder

The module came with no instructions but just workong out what the p- and p+ are and also the en and r g.

If anyone could assist i would appreciate it. Thanks
 

Attachments

  • 2016-09-25 22.50.02.jpg
    2016-09-25 22.50.02.jpg
    410.3 KB · Views: 128
This charger has LiIon charging functions via the input power source, either USB connector or separate input power at IN- and IN+. The LiIon battery should be connected to one of the BAT- pads and the BAT+ pad.

The charger also has built in protection of both current (max 3A) and under voltage (min 2.5V) when the battery is supplying power. The battery will be disconnected from the load at the under voltage point. The item to be powered should be connected between the P- and P+ pads.

spec
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top