Its an ac motor, for 2 reasons the rating plate says 290hz, and the other is that its an induction motor.
It sounds like you want to connect the motor direct to the mains, 2 things to look out for, the motor is rated at 195v, might not be a problem for short periods however the motor will run slower at 3000rpm (which I spose could still be usefull).
The motor probably has 2 windings start and run, 2 of the wires are probably joined inetrnally start and run winding common, however being an electronically controlled application it might be an odd ball setup.
You'll also depending on the design of the motor need a start capacitor to create the phase shift (shaded pole motors dont have a start cap), unless you just want something that you start with a flick.