Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

voltage to current converter

Status
Not open for further replies.
Do you really want zero volts? A 5k resistor across 150 volts results in 30 ma - 4 ma at 20 volts - so with a simple resistor you can get 20 volts to 150 volts to result in current flow of 4 ma to 30 ma.
 
sorry but i wrote it wrong the o/p current should be 4-20mA
yes I want the i/p voltage from 0 to 150V
Its actually an exam question on OPAMPs
 
You need an op amp configured as a voltage input to current output converter. A Google search should give you some ideas on that. (Hint: Using a transistor at the output simplifies the circuit). You bias it to give 4mA output with 0V input. Then you adjust the gain to give you an additional 16mA with 150V input.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top