Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

VCO in Radar Transceiver

Status
Not open for further replies.

gkini19

New Member
Hi All,

I was looking at several papers of radar transceiver that operates at 77GHz to 88 GHz focusing on the VCO and Chirp PLL architecture.

So if we want the output of the VCO to be 77GHz to 88 GHz, all the papers for radar transceivers use VCO with a multiplier to generate frequencies in the range of 77GHz to 88 GHz. (Say 20 * 4 or 38*2 )

What would be the technical reason to use multipliers? why can't we just have an architecture of the VCO that operates at 77 GHz?

Please let me know
 
That would take a special VCO capable of such frequencies. the multipliers take a much lower frequency and multiply it to your 77-88 Ghz. Gunn oscillators or magnetrons are typical oscillators that can reach these frequencies. In radar these are often followed by a high power puled amplifier or TWT.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top