Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

USB(pen drive) interface with PIC18F4550 for data storage like ADC values

Status
Not open for further replies.

Tej_p

New Member
Dear all..
please help me for doing the USB interface with PIC18F4550 micro controller ..
i read the Data sheet and corresponding register set ...
but in that, they are not given the step by step programming sequence ...
i searched in google but can't programming in step wise...
every one using the USB library..
Earlier i done the ADC and timer programmer as per the given data sheet registers..
please help to do this ..how to start communication and send the data and stop communication like wise..
i am also confused with USB HID . USB CDC ...

PLEASE guide me how to do this project ..
i am using mikroC PRO for PIC complier..
if any one have sample project please share mee.
 
The 18F4550 cannot act as a USB host. You need a chip that can do USB OTG (on the go) in order to act as a host.

Mike.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top