Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

USB interface required

Status
Not open for further replies.
USB Chips

Hi

There are 2 ways of interfacing the DSP to the USB:-

1.) Use a USB Tranciever chip like the Philips or Dallas Maxim's, sorry cant recall the chip no, try **broken link removed**
2.) Use a MCU with built in USB I/O interface like Cygnal 8051, Motorola MC68HC08JB8, Microchip PIC16C745/PIC16C765 etc, there plenty of em
3.) Use a simple RS232-USB bridge like the FDTI chips http://www.ftdichip.com/

Hope this helps
Cheers
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top