Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Turning a 7805 on/off with a Push to Make Switch

Status
Not open for further replies.

MPapps

New Member
Hi All,

I am trying to design a circuit to do the following:

Use a Momentary Push To Make Switch to toggle the input of a 7805 on/off

The 7805 is supplied by regulated 12v so i need a circuit that switches its output between 0v and 12v using a Momentary Switch.

I was hoping to find a design or at least a starting point somewhere but have had no luck so far.

Any Suggestions / ideas would be great.

Thanks :)
 
Why not use the proper on-off switch to begin with and leave the momentary one for momentary jobs?
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top