Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Trying to make a battery solar panel voltage controller

Status
Not open for further replies.
The optimal voltage to be running from these panels is slightly over 12 volts. We recommend our customers to have the panels' voltage to be 1.5 times higher than the voltage of battery because it is also important to get a controller to sit in between your panel and the battery. If you are using a 12V system and want to add extra capacity to your system you will wire your batteries in parallel.


Thanking You
Luminousrenewable
 
The optimal voltage to be running from these panels is slightly over 12 volts. We recommend our customers to have the panels' voltage to be 1.5 times higher than the voltage of battery because it is also important to get a controller to sit in between your panel and the battery. If you are using a 12V system and want to add extra capacity to your system you will wire your batteries in parallel.


Thanking You
Luminousrenewable
Not quite sure what you are trying to achieve with this post
My battery bank is 48V noominal and my panel is 80 Volt output
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top