Hi BGAmodz. Before going straight away to the photos let me correct myself about what i stated previously. I said that i had two good boards but i didn't notice that those boards are from the same model.
So here is what i have->
The first damaged board model 4H.L1G01.A12 (burned component marked with red):
Closeup of the burned component:
Now the second damaged board model 48.L1G01.A01 (burned component marked with red):
Closeup of the burned component:
Now for the good boards i have->
Good board model 48.L1G01.A01:
Closeup of the good component code A011:
Second good board model 48.L1G01.A02:
Closeup of the good component code A016:
So with this i should conclude that the burned component of the 48.L1G01.A01 was marked with A011.
Even though i don't have any good 4H.L1G01.A12 board i think i can conclude that the burned component was marked with A016 because even terribly wasted as that transistor is, you can almost see a "16" there, and the good 48.L1G01.A02 board i have here uses a A016 so there you go. Actually these boards are so similar that i guess i could get the same transistor for all of them and it should work ok. Problem is that my google skills are failling me and i wasn't able to get the schematics of these boards.
Can you tell me what transistor should this A011\A016 be?
Thanks in advance!