If I wanted to use a dual opamp to generate a triangle wave of 5000hz because the triangle wave circuit needs just two opamps but I have a quad opamp(LM324,4 in one) can I still use it since I will just leave the remaining pins alone.
2)what would be the right value for a dc cut off capacitor to eliminate offset at that frequency.am thinking of using 1uf cap
Here is the link to the circuit am implementing
**broken link removed**
With R=1k and C=100nf
The wave needs to be as high as possible since I want to compare it with a sine wave.
2)what would be the right value for a dc cut off capacitor to eliminate offset at that frequency.am thinking of using 1uf cap
Here is the link to the circuit am implementing
**broken link removed**
With R=1k and C=100nf
The wave needs to be as high as possible since I want to compare it with a sine wave.