Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Treadmill replacement part

Status
Not open for further replies.

claude callender

New Member
i am looking for a vendor who might carry the replacement part consisting of a potentiometer with several feet of wire and the three connections which attach to the power supply.
Thank you
Picture artached
 

Attachments

  • 244041E3-F5AD-43D7-B995-B48D74BE2FFE.jpeg
    244041E3-F5AD-43D7-B995-B48D74BE2FFE.jpeg
    22.1 KB · Views: 220
You will have to contact the maker of the treadmill for a part like that, doubt anyone else will make it.

Would not think its that hard to make your own up, it just looks like 1/4" spade terminals and a standard pot, though what its value is ?
If you actually have the old one you should find the resistance value stamped or printed on its body.

Again a friendly call to the treadmill maker should give you its value, or it might be specified in the instruction manual, usually free downloads.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top