tracker help

[hub]

could someone help me redraw this schematic?
id like to remove the ones marked in red
id much appreciate help in finishing the project using only
2 resistors
2 capacitors (no trimmer)
1 transistor
10mm x 10mm ferrite coil
cheers

 

[hub]

Tracker

Would this work ???

 

[colin55]

can you go to 4.5v or 6v?

 

[ericgibbs]

Would this work ???

There is no modulation, so how would you hear it in your FM receiver.?

 

[hub]

no pal 1.5 or 3v

 

[hub]

eric excuse the stupidity on my behalf but could you be more elaborate and explain to me how to get it working ...cheers

 

[colin55]

Your circuit is an AM transmitter - beeper:
View attachment 63064

 

[hub]

tried that diagram it didnt work ...in the one i took apart theres no diode and the caps in it are in series cheers oh and it run on a 1.5v

 

[colin55]

How many windings on the transformer?

 

[hub]

on the original id say around 100 or more,its very fine wire and parts of it are still encased in plastic

 

[colin55]

There must be a winding below with a tapping.
You can see my circuit.
You can see it's a feeback or blocking oscillator.
It's a very difficult circuit to get going.
Try the circuit on 3v with the diode.
If you can't get the circuit working, then you can't be helped.

 

[hub]

oh dear !!!!!!!!!!