As he doesn't give any idea what the load might be, or indeed what the capabilities of the source are?, it's hard to say if a regulator is needed at all - but if it is, it would certainly need to be a LDO type.
Nigel,
Without a diode, and depending on the source impedence and load, wouldn't the output just be an integrated square wave? The the source would charge up the capacitor during the +6V interval and then just discharge it back into the source during each 0V period, never reaching peak (depending on frequency and capacitor).
Ken
Nigel,
Without a diode, and depending on the source impedence and load, wouldn't the output just be an integrated square wave? The the source would charge up the capacitor during the +6V interval and then just discharge it back into the source during each 0V period, never reaching peak (depending on frequency and capacitor).
Ken
as pointed out i cant use a capacitor.... am trying to do with regulator... will post the results soon....
i needed one more help.... if u take a closer look at the picture for the first 30ms, the first output is (channel1) is at some voltage near +10V while the second trace is 0.... is it possible for me to just extract those two outputs alone??? ie., the circuit must give an output tht has been recoreded in the first 30ms alone....
hope am clear.... my final output should only be the output observed during the first 30ms....
as pointed out i cant use a capacitor.... am trying to do with regulator... will post the results soon....
i needed one more help.... if u take a closer look at the picture for the first 30ms, the first output is (channel1) is at some voltage near +10V while the second trace is 0.... is it possible for me to just extract those two outputs alone??? ie., the circuit must give an output tht has been recoreded in the first 30ms alone....
hope am clear.... my final output should only be the output observed during the first 30ms....
I don't see two traces in your posted image. I see one trace with an amplitude of +6.2v, not 10V. The first positive pulse is about 30mS, followed by a series of shorter pulses, all the same 6.2v amplitude. Are we looking at the same image?
And to your original question, are you trying to "clip" the pulses at a constant peak of +5v, not create a constant +5v dc output
am sorry for the previous post.... it is wrong.... :-(
as rightly pointed out, there is just one trace showing an amplitude of arnd +6.2V... the positive pulse lasts for 30ms followed by shorter pulses... so i want to extract only that first positive pulse which lasts for 30ms....
and my original question is abt creating a constant 5V dc output...
How do you mean "extract". Do you want to see/measure/store/generate(?) a signal that has just the amplitude, or just the period, or both amplitude and period, of only the 30mS pulse and contain none of the shorter pulses? Or, do you want to know "when" the 30mS pulse occurs relative to the real world clock? Does the 30mS pulse occur only once at the start of some event, or does it occur repetively/randomly among the shorter pulses?