Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

telephone remote control -help!!

Status
Not open for further replies.

theEgO

New Member
hello..
im having problems with my telephone remote control project. my project is basically the same as the one in this site :
**broken link removed**

ive constructed the circuit exactly like the one here. i have'nt assemble the relay parts yet bcoz i wanted to make sure the dtmf decoder n the few main ics are working. first i proceed to check for the required output frm the decoder by using the input frm the telephone line paralel to the telephone instrument. i tried to press for diffrnt keys to get the desired output but unfortunately all attempts have been a failure so far.
i am in a despair right now because i dont know wat izzit tat is wrong. im sure the circuits are connected properly. even my lecturer is not sure wat the problem is.
can some1 shed som light on me???
thank you vr much..
 
I don't see any problem with circuit diagram (except pin10: this input have internal pull-up resistor, so no need connecting to +). Check the X-tal oscillator and input signal level.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top