stm8s timer

Ian Rogers said:

They are all for the same function...

assert_param(IS_TIM1_IT_OK(TIM1_IT)); You need to find out where this function is defined and include it..

Read here
https://sites.google.com/site/learningeclipsearm/6-debugging/b-assert_param

Click to expand...

I am trying to know from the above link. On the other PC, there is another error like symbol_assert_failed not defined for the same code. Thanks.

In my opinion you should not edit a library source code, unless you have plenty of experience and a good reason to. (I think you stated you are starting with stm8)

Anyway, here is an example of STM8 timer use

https://blog.mark-stevens.co.uk/2012/08/using-timers-on-the-stm8s/

hope it helps

With the help of you guys and a bit of research, I managed to write the code without any error. There are a few lines that have to be added in the code, which I found in the examples given in the software. I don't know what these lines suggest, but as of now, it has worked. The lines are

#ifdef USE_FULL_ASSERT

/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t* file, uint32_t line)
{
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

/* Infinite loop */
while (1)
{
}
}
#endif


I need your help one more time. I don't know how to set a timing value. In our project, at certain time, the timer should be switched ON. After the timer is enabled, a variable, say 'a' is incremented to a specific value. After that value is reached, we have to take specific actions, which can be performed in the code.
For e.g.
if(a==100)
{
//code
}
I was previously using PIC controller and mikroc, in which it was very easy to perform above steps. Not able to do the same with stvd.
Thanks in advance.