gerryr1gerry
New Member
I need something which will stop backfeed on the attached (Rough) circuit.This is one of 15 circuits exactly the same.
My problem is that no matter which power source I use , both LED warning lights come on.
The circuit uses 24VAC.
If it were 24VDC I would imagine I would put a diode in each circuit to stop the backfed but that dont help with the 24VAC.
Can anyone suggest a device which will stop the current from backfeeding to the unpowered side of the circuit.
Thanks
My problem is that no matter which power source I use , both LED warning lights come on.
The circuit uses 24VAC.
If it were 24VDC I would imagine I would put a diode in each circuit to stop the backfed but that dont help with the 24VAC.
Can anyone suggest a device which will stop the current from backfeeding to the unpowered side of the circuit.
Thanks