Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
hi
Anyone has source code for this for getting the values on pc in c or c# i dont want to measure periodic temperature.
i shall be thankful
any help
it will be appreciated
The ADC chip you have refrenced in the circuit the ADC08031 can be found here and is obsolete. You also do not mention how you plan to interface to a PC (what port)? Remember the old parallel port is about obsolete and the RS232 port isn't far behind it. You may want to look at micro-controller solutions or other options.
This would be easier done using a simple commercial A/D similar to this unit which has a USB interface and is off the shelf. Code can be written in VB or C easily. The unit offers 4 10 bit A/D channels with differential inputs. Your original choice is not only obsolete but also only an 8 bit A/D chip. The USB unit I linked to is a 10 bit A/D.
hi
Anyone has source code for this for getting the values on pc in c or c# i dont want to measure periodic temperature.
i shall be thankful
any help
it will be appreciated
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
