fuseblower
New Member
hello everyone again,
I'm thinking of buying a thermostat for an incubator that iv'e built
here's the product in question>>
**broken link removed**
In the spec's it will cover a range of 5 - 30 degrees C (38 - 86 degrees F )
but i need at least 98-102 degrees F
i know some basics about electronics but im no where near you guys out there.
so my question is do i just need to replace the thermistor or is there anything else i should change any help would be appreciated
i found a schematic at>>
**broken link removed**
for this unit
i want to thank you all in advance and hope someone can help me out.
cheers paul
I'm thinking of buying a thermostat for an incubator that iv'e built
here's the product in question>>
**broken link removed**
In the spec's it will cover a range of 5 - 30 degrees C (38 - 86 degrees F )
but i need at least 98-102 degrees F
i know some basics about electronics but im no where near you guys out there.
so my question is do i just need to replace the thermistor or is there anything else i should change any help would be appreciated
i found a schematic at>>
**broken link removed**
for this unit
i want to thank you all in advance and hope someone can help me out.
cheers paul