SMD Electrolytic Capacitors

[camerart]

Hi,
I have a Schematic (iPhone 6), that calls for 2.2uF 6.3V 20% Capacitors, on the VDD line.

All of the ones I have are Aluminium cans, but on a repair video, there are no cans to be seen. Do these Caps need to be electrolytic cans or could they be normal -II- type?
Cheers, Camerart

 

[Nigel Goodwin]

As far as I'm aware they simply need to be 2.2uF.

 

[camerart]

As far as I'm aware they simply need to be 2.2uF.

Hi N,
I hope that's true, as I'm redesigning a little compass PCB, that is causing intermittent faults, so I'm trying to be as true to a known use of it as possible.
I have some 2.2 16V 10%, so hopefully they will be ok.
Thanks, C