Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

sensitivity of thermistor

Status
Not open for further replies.

elec123

New Member
hi,

could someone tell me a typical sensitivity of a thermistor used in a potential divider circuit for temps ranging from 0-100 degrees.

Also how can this sensitivity be increased?

cheers
 
Define "sensitivity." Do you mean "accuracy" or "repeatability"? "Lag"?

The main cause of error with thermistors, IMO, would be that the R vs T curve is non-linear, so most of the error would be calculating the temperature for a given R.

As I've heard it said, most temperature measurement devices are not super-accurate as it is usually not necessary to get super-accurate temperature measurements.

You could increase your performance by making sure the thermistor leads are short, use precision resistors in your voltage divider, make sure your A to D is ratiometric, maybe use a low pass filter.

j.
 
The thermistor is a non-linear, negative temperature coefficient resistance. If you look up the data sheet for a typical thermister, the resistance change with temperature is high at low temperatures ( and consequently less accurate). The thermistor value is given at 25 deg C and is usually in the middle of the curve where the rate of change of resistance with temperature is moderate. It is common practice to put a linear resistor in parallel with the thermistor to linearize it.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top