hello guys
I have been working on rs485 basic system for mouths now.
Finally i got the pics side working.
Anywhere i am stuck at the pc software.
I need a protocol to
The Com Port Protocol is as follows:
Baud Rate: 9600
Data Bits: 8
Parity: NONE
Stop Bit: 1
swith to send mode--clear rts
) Send the 1 byte address:
wait 15ms
switch to receive by setting RTS
receive address from pic
switch to send mode
(2) Send the 1 byte data
(3) wait 15ms for the pic process the data
can stay in send mode or poll each pic.
I have little experience in pc programming so i am kindly asking anyone can assist me in any where i will be very greatful.
Thank you.
I have been working on rs485 basic system for mouths now.
Finally i got the pics side working.
Anywhere i am stuck at the pc software.
I need a protocol to
The Com Port Protocol is as follows:
Baud Rate: 9600
Data Bits: 8
Parity: NONE
Stop Bit: 1
swith to send mode--clear rts
) Send the 1 byte address:
wait 15ms
switch to receive by setting RTS
receive address from pic
switch to send mode
(2) Send the 1 byte data
(3) wait 15ms for the pic process the data
can stay in send mode or poll each pic.
I have little experience in pc programming so i am kindly asking anyone can assist me in any where i will be very greatful.
Thank you.