Require help on jumpers

Hello,

For my PCB design , I require a 2-pin or a 4-pin jumper that can be mounted horizontally on the board itself, i.e. the pins will extend from the edge of the PCB horizontally.

Anybody familiar with PCB connectors and jumpers?
Pls advise on a suitable component that can be used for the a/m purpose.

Really appreciate any help. Thks

The common jumper used on most boards is simply a Berg header with 0.100" pin spacing. You can buy these in 90° configuration from most any electronics jobber. Look here to see what Mouser offers as an example...