Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Repairing LED board for DMX par64 venue lights

Status
Not open for further replies.

Boxnut

Member
Hi people, I am a bit stuck here trying to find out what an LED part number might be. Some of the green and blue LEDs have failed and a few red ones flicker at full brightness meaning soon to fail. Now I need replacements and no clue what to replace with.
These LEDs are like 10 MM diameter plus a base X 13 MM board to top of dome.
I am estimating the combined power for the 64 lights is about 10 watt total.
Actually a how to video on youtube but doesn't indicate any specs for the LEDs, so thought I would ask here.
Thanks people.
 
I assume that the LED pcb board has many resistors on it, did you check if they are still ok? You might contact the company and ask for a new LED pcb.
Replacing the LED's by hand is nonsense since you don't know if they will get overpowered and burn again on the current board.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top