Remote Control Help!

A

Adz

New Member

• Jul 5, 2003

• #1

Hey,

i need the schematics for a remote control that has 4 bottons one makes a motor go back the other forward then a nother motor that goes left and right does anyone have the schematics for a transmitter and a receiver that can do this

thankx

 

P

pttknx

New Member

• Sep 8, 2003

• #2

i need this as well

it would be very helpful if you could sent this info to me as well i am makeing a vehical that drives like a tank so i need a botton for one side to move forward and backward and the same for the other any help would be greatly aprated thanks in advance

 

tansis

New Member

• Sep 9, 2003

• #3

This would be a good place to start
http://www.glolab.com/encdec/mothol/mothol.html

http:/www.holtek.com
Make a range of ic's for both simple digital (on/off) and porpotional control for servo operation.

 

S

stumitch

New Member

• Sep 26, 2003

• #4

newbie remote comment

surely the PIC can be programmed to do such a thing. one configured at 38 hz and carrier the other with a simple decoder...