Reducing output voltage

D

dion

New Member

• Aug 25, 2008

• #1

Hi,

I have a vending machine to which I want to attach a water pump. Problem is the older machine only has a 110V output, while the newer water pump requires a 24V output. How do I 'step' this 110 to 24? Are there off the shelf solutions, or will I have to create a solution?

Many thanks,
Dion.

 

Mikebits

Well-Known Member

• Aug 25, 2008

• #2

Would that 24v be AC or DC? If AC a transformer should do it

 

D

dion

New Member

• Aug 25, 2008

• #3

That would be AC. Thanks.

 

jpanhalt

Well-Known Member

Most Helpful Member

• Aug 26, 2008

• #4

Transformers to convert 110 or 220 to 24 VAC are very common. Low-voltage controls for machines (usually 1 HP or greater) use them. So, if you scrounge through surplus/junk yards you are likely to find one. John

 

Hero999

Banned

• Aug 26, 2008

• #5

How powerful is the motor?

24V is a pretty common voltage you should be able to get hold of one pretty cheaply.