Receiver module for 433.92 MHZ

[Adrienne]

I built a transmitter that sends out a 433.92 MHZ carrier wave. (OOK style). I need a pre-built receiver module that sets a high current on two leads at 30mA once that signal is received, and turns off when the signal is absent. The receiver size doesn't matter. If you help me you can see my boobs or something.

So this is what I'm working with.

**broken link removed**

I used the max 1472 at 433, now i need the receiver unit to accept a signal, then to amplify that into usable voltage.

 

[ronv]

Try E-bay. There are tons of them for less that you can build them.