Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

reading rfid 125 khz

Status
Not open for further replies.

daredevil3

New Member
Hy everybody. I build a circuit rfid.
The reader frequency is 125kHz, the output from the reader sends pulses to the pin RA4 pic16f887 with the internal oscillator set to 8MHz.
If a tag is present, the pulses conform to a bit rate of 512us per bit.
When a tag is present it will transmit its code over and over.
The code will consist of long pulses (about 512us each = 1 TTL)
and short ones (about 256us = 0 TTL)
Can you help me to write a source code for pic16f887 that receive data to RX pin (RA4) and display it on LCD 16x2?
Thank you very much

Sorry for my english
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top