Random number generator confusing me:-(

H

Heyrizwan

New Member

• Oct 29, 2010

• #1

Hello-every1
My Project is to make random number generator and the display should be on Seven Segment and the random should be between 1 and 6.
what can i do?
plz help me out.
if any -1 know the solution plz reply me here or e-mail me at sweet.mengo@yahoo.com

 

Last edited: Oct 30, 2010

M

Martel

New Member

• Oct 29, 2010

• #2

Since you need BOTH 1-6 and 0-9 possibilities, I'd suggest you to use a microcontroller for your project.

Using CMOS/TTL will require you to use two counters ( 6 and 10), a seven-segment driver IC and a binary full adder IC for the 6 counter.(the 6 counter will generate numbers from 0 to 5 and you need 1 to 6) plus the switching between the two counters.

 

H

Heyrizwan

New Member

• Oct 30, 2010

• #3

but we have to use TTL ic's neither CMOS nor microcontrollers and i need random numbers only from 1 to 6,plz help me waiting for your reply

 

Last edited: Oct 30, 2010

blueroomelectronics

Well-Known Member

• Oct 30, 2010

• #4

What do you have?

 

H

Heyrizwan

New Member

• Oct 30, 2010

• #5

this is the circuit i have.but it is a random number generator from 0 to 9

 

Last edited: Oct 30, 2010

blueroomelectronics

Well-Known Member

• Oct 30, 2010

• #6

Your links are broken. You can't point to a picture on your computer it must be hosted somewhere.