Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Hello every body. I want to know Un in the circiut in the attached file cabletermination is it the voltage of the source or the load impedance ZL
any one can explain it to me?
thanks ω
Un is the voltage before the long cable and after the termination. There should be some drops of voltage here. Though its quite small, but its very significant with high frequency communications.
Thanks for reply. can I say that the voltage from the source=Un+the voltage drop due to the coax impedance+the voltage drop due to the load impedance? or how I can calculate it?
If its zero, then, no answer for the equation. It becomes an open circuit. there is no such thing as infinity in the real world, it can be simulated by using 1G ohm or higher. If you're interested in using infinity, we need to deal using higher math. I'm not an expert in this case.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.