Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Question regarding voltage switch

Status
Not open for further replies.
First off, let me say I feel real dumb even asking this question but it's one of those things where I'd rather ask and look stupid than do it wrong and remove all doubt. I fully accept and embrace the ridicule that is likely to come my way over this dumb issue.

I've got a voltage switch on a power supply here and I know I'm supposed to set it to 115...but my problem is I don't really know how to tell if it's actually set right. Should the voltage number be visible or should it be covered up?

So, to make it simple as possible I've included 2 photos...basically I just need to know which one is the right setting.
 

Attachments

  • IMG_20190325_203348.jpg
    IMG_20190325_203348.jpg
    161.5 KB · Views: 136
  • IMG_20190325_204208.jpg
    IMG_20190325_204208.jpg
    231.9 KB · Views: 139
When you can read the voltage you want, that should be the right position.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top