PWM on PIC12F615

Hi,
On PIC12F615, lets say i set CCP1M<3:0> to 1100 (PWM mode; P1A active-high; P1B active-high) to use PWM. If I set P1ASEL = 0, can I use use GP5 and GP0 as individual IO?
I'm worried that GP0 will give me a PWM because GP0 and P1B are the same pin and I set both P1A and P1B as active High.

What I'm trying to do is to use 2 ADC channel (AN1 and AN3), 1 PWM channel (P1A) and 2 Output pin (GP0 and GP5) on PIC12F615.
Is that possible..?

Thanks.

MrNobody said:

What I'm trying to do is to use 2 ADC channel (AN1 and AN3), 1 PWM channel (P1A) and 2 Output pin (GP0 and GP5) on PIC12F615.
Is that possible..?

Thanks.

Click to expand...

Of course you can.