Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

PWM on PIC12F615

Status
Not open for further replies.

MrNobody

New Member
Hi,
On PIC12F615, lets say i set CCP1M<3:0> to 1100 (PWM mode; P1A active-high; P1B active-high) to use PWM. If I set P1ASEL = 0, can I use use GP5 and GP0 as individual IO?
I'm worried that GP0 will give me a PWM because GP0 and P1B are the same pin and I set both P1A and P1B as active High.

What I'm trying to do is to use 2 ADC channel (AN1 and AN3), 1 PWM channel (P1A) and 2 Output pin (GP0 and GP5) on PIC12F615.
Is that possible..?

Thanks.
 
Status
Not open for further replies.

Latest threads

EE World Online Articles

Loading
Top