Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Proteus Help - Latching Relay

Status
Not open for further replies.

dschmid4

New Member
I'm new to Proteus but desperately need to simulate a dual coil latching relay. Specifically, I'm using a HFD2/005-M-L2 from Hongfa.

Need this to be an active component so I can run simulations. How do I go about this?

Dan
 
You make a sub circuit that contains the extra parts... Do you need a single pulse or separate on / off??

A simple JK flipflop will give both operations...

One thing to remember on Proteus.... A relay or switch cannot switch in a power rail... It does not work!!
 
Can you generate the SET, RESET pulses 5V 40mA for 5 ms min. ?

At 200mW this should be possible to leave power on but intended for pulse operation.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top