yellowbunnyhoppers
New Member
I need help with program for this. I have tried but I just cant. Thanks
Im using a ATtiny13A, 2 x shiftr 74hc595n, 2 x switch, 15 x leds
1st switch is a power on switch automatic off when 3 circuits finish.
what I wish to do is activate 11 leds in a chase at a programmed time interval between each of say 1, 1.25, 1.5, 1.75, 2 seconds.
3 circuits of the chase. then nothing (end - power off).
random speed deseleration of 1 sec notified by a light. At a random time of 2 secs 2.25 sces, 2.5 secs, 2.75 secs,3 secs, 3.25 secs maybe not at all so totally random.
second switch is with 3 lights lets call it a speed boost, lights go up in increments of 2 seconds, 1st light, speed up by 1 sec when switch 2 is pressed, 2 nd light speed up 1.25 secs when switch 2 is pressed, 3rd light speed up by 1.5 secs when switch 2 is pressed. Then a pause off 3 secs before rotation of the speed boost starts again.
the speed deseleration cancels the speed boost if it is activated.
I think the atmel mc can only hold 1k.
Im using the Arduino stuff to help and to program the mc.
I am a novice and I have tried but my dyslexia is a bit of a problem.
Ive read some posts doing what I am trying to do with program codes and it seems so easy but I just cant do it ahhhhhhhhhhhhh. lol
**broken link removed** - I read this and the codes are what I need to include I think?
Im using a ATtiny13A, 2 x shiftr 74hc595n, 2 x switch, 15 x leds
1st switch is a power on switch automatic off when 3 circuits finish.
what I wish to do is activate 11 leds in a chase at a programmed time interval between each of say 1, 1.25, 1.5, 1.75, 2 seconds.
3 circuits of the chase. then nothing (end - power off).
random speed deseleration of 1 sec notified by a light. At a random time of 2 secs 2.25 sces, 2.5 secs, 2.75 secs,3 secs, 3.25 secs maybe not at all so totally random.
second switch is with 3 lights lets call it a speed boost, lights go up in increments of 2 seconds, 1st light, speed up by 1 sec when switch 2 is pressed, 2 nd light speed up 1.25 secs when switch 2 is pressed, 3rd light speed up by 1.5 secs when switch 2 is pressed. Then a pause off 3 secs before rotation of the speed boost starts again.
the speed deseleration cancels the speed boost if it is activated.
I think the atmel mc can only hold 1k.
Im using the Arduino stuff to help and to program the mc.
I am a novice and I have tried but my dyslexia is a bit of a problem.
Ive read some posts doing what I am trying to do with program codes and it seems so easy but I just cant do it ahhhhhhhhhhhhh. lol
**broken link removed** - I read this and the codes are what I need to include I think?