First off I did a quick search and did not find exactly what I was looking for.
What I would like to know is the most "simple" way to program a pic16f676, this would be used for a voltmeter I have already assembled minus the Pic. Along with the authors schematic I have the hex code. Is it easier to build ones own programmer using a schematic and making another board to last me with a 14pin socket? Then use some free software to program the pic. Give me your suggestions on how I should go about doing this.
Thanks,
Ken
What I would like to know is the most "simple" way to program a pic16f676, this would be used for a voltmeter I have already assembled minus the Pic. Along with the authors schematic I have the hex code. Is it easier to build ones own programmer using a schematic and making another board to last me with a 14pin socket? Then use some free software to program the pic. Give me your suggestions on how I should go about doing this.
Thanks,
Ken