Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Printing on Laminate

Status
Not open for further replies.

yuenkit

New Member
Hi,

I wish to etch a PCB my own. but the problem is, how to print the laminate from the PCB software. Do I have to buy a laser printer for that?

Last time i used to print the artwork on a piece of paper and photostat it, but the result was not sastifying.
 
If you don't mind traveling to the corner store, you can use the method I described using a conventional laser copier. It tried this strategy with 8-mil traces and 9-point fonts and got great results from it.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top