Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Preamp tube DC heater circuit

Status
Not open for further replies.
Now you got me going. Why bother twisting filament wires if the OP is powering them on DC? Twisting the filament wires is supposed to be a hum-bucking technique, but it can only apply if the filaments are heated with AC.

Quite right - no need to do it for DC heaters - wxcept it looks pretty cool ;)
 
Won't it stop externally induced currents INTO the heater?
Potentially, but the heater/cathode thermal time constant is so long that any current induced would not have a measurable effect on cathode emission.
 
Status
Not open for further replies.

New Articles From Microcontroller Tips

Back
Top