Hi,.
I have 3 dmx lights. module
1x led wash light
1x laser light
1x strobe light
I would like to set these up in my mancave but on a switch, i dont want to mess with a 512 controller but would like to know if its possible to build something that is preprogrammed so when i flick a switch it turns on power to the lights and also powers up the module and turns them on.
the dmx is this.
Led wash light - 3 channels - ch1 22, ch2 145, ch3 1
laser - 2 channels - ch1 1, ch2 55
Strobe -2 channels - ch1 2, ch2 1
Is this possible as all the lights dont need changing channels or settings after.
thanks
I have 3 dmx lights. module
1x led wash light
1x laser light
1x strobe light
I would like to set these up in my mancave but on a switch, i dont want to mess with a 512 controller but would like to know if its possible to build something that is preprogrammed so when i flick a switch it turns on power to the lights and also powers up the module and turns them on.
the dmx is this.
Led wash light - 3 channels - ch1 22, ch2 145, ch3 1
laser - 2 channels - ch1 1, ch2 55
Strobe -2 channels - ch1 2, ch2 1
Is this possible as all the lights dont need changing channels or settings after.
thanks