power amplifier

Status
Not open for further replies.
R

rakibulraju

Member
I am doing a project .For this project I need a power amplifier which will work at about 1Mhz with 20db gain.Can anyone please suggest me schematic of a power amplifier?
 
rakibulraju said:
I am doing a project .For this project I need a power amplifier which will work at about 1Mhz with 20db gain.Can anyone please suggest me schematic of a power amplifier?
Click to expand...

You need to be more specific.
Power Amplifier (?) Output Power, Load Z
Voltage Amplifier (?) Input,
Purpose ?

Ramesh
 
The two resistors value should be such that R1 and R2 apply voltages to the output transistor bases so that Trl (NPN) base is about 0.6V more positive than its emitter, and Tr2 (PNP) base is about 0.6V more negative than its emitter, which is at half of VCC.Please help me to select the values of R1 and R2.
 

Attachments

  • ab amp.PNG
    22.2 KB · Views: 191
Ramussons said:
You need to be more specific.
Power Amplifier (?) Output Power, Load Z
Voltage Amplifier (?) Input,
Purpose ?

Ramesh
Click to expand...
The two resistors value should be such that R1 and R2 apply voltages to the output transistor bases so that Trl (NPN) base is about 0.6V more positive than its emitter, and Tr2 (PNP) base is about 0.6V more negative than its emitter, which is at half of VCC.Please help me to select the values of R1 and R2.
 

Attachments

  • ab amp.PNG
    22.2 KB · Views: 196
You can't calculate values for those resistors because it's not a 'circuit', it's only a theoretical part of a circuit - you need the rest of the circuit to calculate things, plus the missing parts of that partial circuit.
 

Explain the "Input" - Type of Signal, Amplitude, DC Offset, Source Resistance, etc.

Ramesh
 
Your circuit has a voltage gain of 0db. Gain of 1 or slightly below 1. It has current gain.
 
I am not in love with this amp. But this has voltage gain. Not going to work at 1mhz. But it is a place to start.
 
You are showing an audio amp in post #3 but your 1st post asks for a amp to work at 1Mhz. Big differance.
 
Status
Not open for further replies.

Similar threads

  • Question
Bench Power Supply
2
Replies
20
Views
2K
Tony Stewart
F
Handy Bench Power Supply
Replies
8
Views
2K
schmitt trigger
S
F
  • Question
Battery adapter to power bluetooth speaker?
Replies
12
Views
2K
fishyfool
F
  • Question
How to modify/ design error amplifier compensation circuit (with TL431) for variable flyback converter and make it stable.
Replies
2
Views
2K
ChrisP58
B
  • Question
Transformer Power Output Mystery
Replies
12
Views
2K
briesmith
B
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…