hi all, i have a dynex plasma dx-pdp42-09. i recently had a small roof leak and like literally 2 drops of water went into the tv right down the middle. poof not working anymore. i opened up the tv and found 2 of the little buss bars on the power supply roasted. to check the tv i jumped out the 2 buss bars and tried to test it. when i plug it in i get a click noise and the led on the front of the tv lights up red. there is also a green led on the power supply that lights up. however when i try to turn on the power nothing happens. i have tested the power supply and only have power on the 5vsb test point. i am fairly apt at electrical testing. any suggestions. thanks I do have a good general understanding of repair and testing but not an expert by any stretch.