Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
J1 in the schematic represents a terminal block or connector. J2 in the mechanical drawing could be anything that occupies that much physical volume or board space/height...
There is something seriously wrong with the schematic which shows both the primary of the power transformer and the output of the supply connected to a common "ground"?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.