I am trying to use a PIC18F to drive a LVDS display (**broken link removed**). I have tried to program the PIC to output the values for HSYNC, VSYNC, and Data Enable as described in the data sheet, and from what I can tell on a scope, have all these timings correct. I am then feeding these signals to a DS90C365 LVDS transmitter that goes to the display.
As for the data inputs on the DS90C365, I am tying all of one color high while the other colors are tied low (for this application I only need to get a single color on the screen).
Unfortunately, the display is not turning on or showing anything. Is there anything else that I could be missing?
As for the data inputs on the DS90C365, I am tying all of one color high while the other colors are tied low (for this application I only need to get a single color on the screen).
Unfortunately, the display is not turning on or showing anything. Is there anything else that I could be missing?