pic16f877a in Proteus 8

[Mohamed_Othman]

Dear Friend
kindly i hope you inform me about what mean that error in picture attached , i am beginner in Proteus 8 ,

how to connect pic16f877a in Proteus 8 , what is wrong ?
after i am build program and save it as hex file , and upload file to micro controller , when run simulations not work

file in attachment you see copy of picture and file of circuit from proteus 8

regards

 

[Ian Rogers]

Your code is calling a location that isn't valid.

Post your code..

 

[Mohamed_Othman]

Your code is calling a location that isn't valid.

Post your code..

which code you mean ? was written script in Micro C ?

 

[Ian Rogers]

which code you mean ? was written script in Micro C ?

Can you show me the "script"..

 

[Mohamed_Othman]

void main() {
trisb= 0b000000000; //portb is output , program port b is output
portb=0 ; // all leds is off
for ( ;; ) {
portb= 0b00101011 ;
delay_ms (10000) ;
portb = 0b11010100 ;
delay_ms(10000) ;
}
}

 

[Ian Rogers]

Okay... Uncheck all the libraries in the library manager.... I don't think you need any for that code..

 

[Mohamed_Othman]

So what can i do now
I want knowk where is mistakes k or wrong in n my circuit can you explain by screenshoot

 

[Ian Rogers]

There is nothing wrong with that code...
The error window in Labcenter Proteus shows you have a pic location violation!!! MikroC is compiling the hex file wrong.

In MikroC make sure all the libraries in Library manager are unchecked... Also make sure the project is set for a pic16f877..

 

[Mohamed_Othman]

There is nothing wrong with that code...
The error window in Labcenter Proteus shows you have a pic location violation!!! MikroC is compiling the hex file wrong.

In MikroC make sure all the libraries in Library manager are unchecked... Also make sure the project is set for a pic16f877..

can you explain to me by screen shoot , hoe can i fix hex file from Micro C ?

 

[Mohamed_Othman]

whats wrong in this script

void main() {
char x;
trisb=0 ;
portb= 0;
for ( ; ; ) {
portb=0b0 ;
delay_ms(1000) ;
for (x=0 ; x<<8 ;x++ ) {
portb=portb<<1 ;
delay_ms(1000) ;
}
}
}

 

[Mohamed_Othman]

what mean that error ? and how can i fix it ?

 

[Pommie]

What is PIC168771 as you appear to be trying to compile for it. See line 9 of above image.

Mike.

 

[Mohamed_Othman]

What is PIC168771 as you appear to be trying to compile for it. See line 9 of above image.

Mike.

PIC 16F877A as available in program , how can i fix this error ? what mean of it ? what must i am looking too , when found that error

 

[Ian Rogers]

What is PIC168771 as you appear to be trying to compile for it. See line 9 of above image.

Mike.

It's a Proteus thing... The correct part is modelled... That is the library part

I have now a copy of microC and compiled your code and run in Proteus... No problem at all