okay, I tried to program another PIC, programming seems okay as usual, but the pic still does not work. Heres the screen from MPLAB, when I hit 'program' I get a screen that says
Device NOT blank, Program Memory Configuration Bits (Even though it is blank??)
I programmed it and then did a verify
PICSTART Plus Firmware Version 04.50.11
Device is NOT blank:
Program Memory
Configuration Bits
PICSTART Program\Verify Report
30-May-2009, 17:35:04
Device Type: PIC16C57
Address Range 0-7ff
Programming/Verification completed successfully
PICSTART Program\Verify Report
30-May-2009, 17:35:18
Device Type: PIC16C57
Address Range 0-7ff
Program Memory Errors
Address Good Bad
0001: 08A0 0820
0004: 08D7 0857
0006: 089E 081E
000B: 0881 0801
000C: 08B8 0838
000D: 08CC 084C
0011: 08FC 087C
0012: 08D0 0850
001C: 0C87 0C07
0048: 04C7 0447
0049: 0996 0916
0059: 0AA9 0A29
005E: 0ACF 0A4F
0063: 05A3 0523
0069: 05A3 0523
006A: 0ABA 0A3A
006F: 05A3 0523
0070: 0AB0 0A30
0072: 06E7 0667
0075: 07FA 077A
0078: 0DE0 0D60
007D: 099F 091F
0080: 05C7 0547
0081: 02A4 0224
0087: 0990 0910
008A: 0990 0910
008B: 0388 0308
0091: 06E7 0667
0092: 0A90 0A10
0093: 0CFF 0C7F
0095: 04C7 0447
0097: 07E7 0767
Any additional errors are not displayed.