jimmythefool
New Member
I'm wondering if any of you guys have any experience with EMC surge testing on Microcontroller inputs.
I have attached a schematic (hopefully) of how I intended to protect my input from the surge test (1000v). I will be using a screened cable, which will help.
I don't have a clue on how much current will be induced through the cable screening onto the cores.
Any advice would be greatly appreciated
Regards
Jim
I have attached a schematic (hopefully) of how I intended to protect my input from the surge test (1000v). I will be using a screened cable, which will help.
I don't have a clue on how much current will be induced through the cable screening onto the cores.
Any advice would be greatly appreciated
Regards
Jim