The PIC16F870 has two Vss pins one of the them at the left and the other at the right.
The Vss pin near the OSC1 and OSC2 (where the Xtal goes; left) is wired with the Vss pin that is near the Vdd (right).
in other words all Vss pins from the uC are wired at a common GND
In a PCB design is it correct to wire down a component, like a resistor (thru hole)
The Vss pin near the OSC1 and OSC2 (where the Xtal goes; left) is wired with the Vss pin that is near the Vdd (right).
in other words all Vss pins from the uC are wired at a common GND
In a PCB design is it correct to wire down a component, like a resistor (thru hole)