Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Register Log in
  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Panel PC NO display (power indicator blinking)

Status
Not open for further replies.
A

asif afridi

New Member
Dear all good morning,
panel pc no display power indication light continue blinking, i check the power board Nothing looked bad, then i use slightly heat gun on 40055ic the blinking is stop and display is normal, after 10sec again display is off and power light is blinking, There are other components around it as well,What could be the problem?
 
what brand and model? LED or LCD? How old? any pictures?
probably bad CAPS? (Capacitors) Narrow down the part that gets heated by using a soldering iron NEAR the component.
 
Status
Not open for further replies.

Similar threads

Z
  • Question
LED Panel power supply issue
Replies
2
Views
2K
zgabor
Z
Y
  • Question
Steinberg UR44 Audio Interface No Power
Replies
6
Views
3K
Young_Silent_Made_IT
Y
R
  • Question
Active monitor - power up but no sound during a few minutes
Replies
7
Views
1K
drtechno
D
K
RC transmitter - Absima CR3P - No power
Replies
14
Views
2K
RDC
R
B
  • Question
Repairing Vacuum Fluorescent Display Driver on IRD 245
Replies
4
Views
2K
blowerman
B

Latest threads

New Articles From Microcontroller Tips

Back
Top