Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Panasonic Shelf Audio System - No Audio - Model SA-AK630

Status
Not open for further replies.

Rat Face

New Member
Hello,

I have a Panasonic SA-AK630 Shelf stereo system and the unit puts out barley audible audio. There is only incredibly feint or no audio coming from speakers or headphone jack.

There is a fan that apparently is dead. Not spinning.

I checked media source, Re-started, Checked speaker wire connections, checked for loose main and daughter boards and fried components ( basicalla visual inspection)

But found nothing unusual

Any Ideas on what the issue might be?

thanks!!
 

Attachments

  • pana.jpg
    pana.jpg
    22.8 KB · Views: 254
There is a fan that apparently is dead.
if your circuitry does not have "decent" thermal prot. there might be a lot of issues
. . . but there has been and occasion where the digitally controlled volume locks to default level and can be only decreased -- once you do -- the cold reset ("wall" OFF/ON re-defaults)
you should address local yellow pages on this
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top